Series EL 9000 DT Conventional electronic loads 400W up to 1200W

Description

Adjustable, programmable, carrying handle and tilt stand
Gorilla glass TFT touch display, versatile function generator, user profiles, battery-discharge mode
Active oscillation suppression, efficient protective input filter, advanced thermal management
On board 3-way interface (Ethernet/USB/analogue)
Voltages 0-80V up to 0-750VDC
Currents 0-5A up to 0-80A
Powers 400W up to 1.2kW

Request a Quote

A member of our sales team or one of our reps will respond as soon as possible

Product highlights

  • TFT Touch Display with 64.000 colours with integrated comfortable function generator (default waveforms: sinus, triangle, rectangular, trapezoid, DIN 40838/car, ramp) as well as alarm manager and battery test.
  • High-performance “FPGA light”(Field-Programmable-Gate-Array Lattice ECP2) and ARMprocessor controlled hardware, significantly improving reaction time of analog and digital
  • controls.
  • 16 Bit ADC/DACs (high-resolution programming and read-back)
  • Voltage accuracy 0.1% of U-nominal
  • Highly isolated structure, therefore much less sensitive against disturbances under operation (higher immunity = higher reliability)
  • Active damping in the DC-input circuit: Oscillations, typically caused by long DC leads or unexpected impedances of the DC source connected, are significantly reduced.
  • Optimised thermal management: Eliminates a sudden stop upon an over-temperature condition. The E-load will adapt the maximum power capability through an automatic derating, subject to the existing thermal conditions.
  • Input-filter protection circuit, preventing damage from DC voltage applied that may contain a high-frequency AC part.
  • Standard on-board 3-way Interface: Analogue 0-5V/0-10V, USB and Ethernet/LAN (all galvanically isolated)
  • Professional user software EA Power Control for up to 20 devices (license fee applies)
  • User-calibration function: In case of local servicing, the user can measure the deviation values and key-in the correction values into the menu to restore ex-factory precision
  • Safety compliant to IEC/EN 61010
  • EMI compliant to EN 61000-6-3, EN 55022 class B (meets EMI requirement for residential-, commercial- and light-industrial environment)